D-Link xStack DES-6500 Cli Manual page 194

xStack DES-6500 Modular Layer 3 Chassis Ethernet Switch CLI Manual
D E S - 6 5 0 0 : 4 #
config ssh server
Purpose
Syntax
Description
Parameters
Restrictions
Usage example:
To configure the SSH server:
D E S - 6 5 0 0 : 4 # c o n f i g s s h s e r v e r m a x s e s s i o n 2 c o n t i m e o u t
3 0 0 a u t h f a i l 2
C o m m a n d : c o n f i g s s h s e r v e r m a x s e s s i o n 2 c o n t i m e o u t 3 0 0
a u t h f a i l 2
S u c c e s s .
D E S - 6 5 0 0 : 4 #
show ssh server
Purpose
Syntax
Description
Parameters
Used to configure the SSH server.
config ssh server {maxsession <int 1-8> | contimeout <sec 120-
600> | authfail <int 2-20> | rekey [10min | 30min | 60min | never] |
port <tcp_port_number 1-65535>}
This command allows users to configure the SSH server.
maxsession <int 1-8> - Allows the user to set the number of users
that may simultaneously access the Switch. The default is 8.
contimeout <sec 120-600> - Allows the user to set the connection
timeout. The user may set a time between 120 and 600 seconds.
The default is 120 seconds.
authfail <int 2-20> - Allows the administrator to set the maximum
number of attempts that a user may try to logon utilizing SSH
authentication. After the maximum number of attempts is exceeded,
the Switch will be disconnected and the user must reconnect to the
Switch to attempt another login.
rekey [10min | 30min | 60min | never] - Sets the time period that the
Switch will change the security shell encryptions.
port <tcp_port_number 1-65535> - The TCP port number of the
server. TCP ports are numbered between 1 and 65535. The "well-
known" port for the SSH management software is 22.
Only Administrator-level users can issue this command.
Used to display the SSH server setting.
show ssh server
This command allows uses to display the current SSH server
setting.
None.
190