0512 [Execute Itb Manual Lubrication]; 0514 [Reset Cleaning System Message]; 0515 [Reset Parts Counter] - Ricoh Pro 8300S Operating Instructions Manual

2. Details of Menu Items in Adjustment Settings for Operators
Code
9 Replenishment quit forcefully

0512 [Execute ITB Manual Lubrication]

Apply lubricant to the intermediate transfer belt.
Lubrication makes the surface of the intermediate transfer belt smoother, which extends the life of the
cleaning unit for the intermediate transfer belt.
This operation takes about 5 minutes during which a message appears on the control panel.
After you have replaced the cleaning unit for the intermediate transfer belt, lubricate it. For details about
lubricating the unit, see the Replacement Guide.
[ITB Manual Lubrication]

0514 [Reset Cleaning System Message]

Press [Execute] after cleaning, the system message to perform cleaning will be reset.
[Dust Filter (Right of Main Unit)]

0515 [Reset Parts Counter]

Reset the counter value of replacement part after the replacement. Refer to Replacement Manual for the
details of part replacement.
48
Status
Setting Item
Setting Item
Causes
• The front covers have
been closed.
• The power was turned
off during the
operation.
Press [Execute].
Press [Execute].
Solutions
Open the front covers, turn
on the main power, and
then try the operation again.
Remarks
Remarks