Table of Contents
Advertisement
3
Basic Management Tasks
This chapter describes the following topics:
◆
Displaying System Information
contact information.
◆
Displaying Hardware/Software Versions
status, and firmware versions
◆
Configuring Support for Jumbo Frames
◆
Displaying Bridge Extension Capabilities
parameters.
◆
Managing System Files
configuration files, and set the system start-up files.
◆
Setting the System Clock
NTP or SNTP servers.
◆
Configuring the Console Port
◆
Configuring Telnet Settings
◆
Displaying CPU Utilization
◆
Displaying Memory Utilization
◆
Resetting the System
after a specified delay, or at a periodic interval.
– Provides basic system description, including
– Shows the hardware version, power
– Enables support for jumbo frames.
– Shows the bridge extension
– Describes how to upgrade operating software or
– Sets the current time manually or through specified
– Sets console port connection parameters.
– Sets Telnet connection parameters.
– Displays information on CPU utilization.
– Shows memory utilization parameters.
– Restarts the switch immediately, at a specified time,
– 63 –
Advertisement
Chapters
Table of Contents
