Fujitsu M10 Installation Manual page 124

For the Type-2 cable support
●
a. Loosen the four screws (C in
Figure 3-47 Removing the cable support fixing brackets (1)
b. Slide the cable support fixing brackets (D in
Fujitsu M10/SPARC M10 Systems Installation Guide ･ July 2015
110
Figure 3-46 Securing the cable support fixing brackets and the rails
Mounting
area (4U)
2U center
1U center
REAR
Figure 3-47) from the inside of the cable support.
Figure
C
3-48) to remove them.