Fujitsu M10 Installation Manual page 239

XSCF> console -p 0
Console contents may be logged.
Connect to PPAR-ID 0?[y|n] : y [Enter] key
{0} ok
6.
Press the [Enter] key. Then, press the [#] (default value for the escape
symbol) and [.] (period) keys to move from the console to the XSCF shell.
{0} ok #.
exit from console.
XSCF>
7.
Execute the poweroff command to stop the physical partition.
XSCF> poweroff -a
PPAR-IDs to power off :00,01
Continue? [y|n] : y
00 : Powering off
01 : Powering off
*Note*
This command only issues the instruction to power-off.
The result of the instruction can be checked by the
"showpparprogress".
8.
Execute the showpparprogress command, and confirm that the command
displays "The sequence of power control is completed." and ends.
XSCF> showpparprogress -p 0
PPAR Power Off PPAR#0 [ 1/ 3]
CPU Stop PPAR#0 [ 2/ 3]
PSU Off PPAR#0 [ 3/ 3]
The sequence of power control is completed.
XSCF>
Oracle Solaris is preinstalled on the SPARC M10 system. According to the purpose,
either use the preinstalled Oracle Solaris as is or reinstall it.
To reinstall Oracle Solaris, install the latest Oracle VM Server for SPARC. For the
latest information on the supported Oracle Solaris versions and SRU, see the Fujitsu
M10/SPARC M10 Systems Product Notes.
Chapter 7 Making the Initial System Settings 225