Fujitsu M10 Installation Manual page 152

b. Slide in the cable support all the way, and tighten the four screws (C in
Figure 3-87 Attaching the cable support (2)
Note - If the dimension between the front and rear columns of the rack is less than 740 mm,
secure the cable support without sliding it in all the way. The fixing location varies
depending on the dimension between the front and rear columns of the rack. Based on
Figure
with the screws (F in
Figure 3-88 Attaching the cable support (3)
Table 3-11 Dimensions between the front and rear columns and scale positions
Dimension between front and rear columns (mm)
740
Fujitsu M10/SPARC M10 Systems Installation Guide ･ July 2015
138
3-87).
C
3-88, align the scale marks (E in
Figure 3-88) of the fixing brackets to secure the cable support.
Scale position 1st
Scale position 10th
Scale
position 6th
E
F
REAR
Figure 3-88) (spacing: 10 mm) on the cable support
REAR
Scale position
1st
Figure