Fujitsu M10 Installation Manual page 163

Figure 4-7 Removing the blank panel
B
Figure 4-8 Mounting the crossbar unit
A
2.
Move the crossbar cables (optical) of XBBOX#80/#81.
a. Remove the crossbar cables from L4 to L7 and from R4 to R7 of crossbar unit
#1 (see Figure 4-9). Hold the tab (A in
(optical) and pull it straight out in the direction of the arrow to remove the
cable.
Note - Do not pull it out with a hold on the cable. Doing so prevents the connector lock from
A
A
Figure 4-10) of the crossbar cable
Chapter 4 Configuring Building Block Connections 149