Logging In To The Xscf - Fujitsu M10 Installation Manual

Figure 6-5 Rear of the SPARC M10-4S
Figure 6-6 Rear view of a crossbar box
6.3

Logging In to the XSCF

This section describes the procedure for logging in to the XSCF by using the default
XSCF user account.
Log in to the XSCF by using the default user account and authentication method until
a user account appropriate to the user environment is registered for you. The default
user privileges are useradm and platadm.
Remarks - platadm is mainly used to manage the whole system. useradm is mainly used to
manage user accounts. For details on the user privilege types and the privileges, see
7-3.
1.
After the system management terminal displays "SCF_READY", press the
[Enter] key.
Fujitsu M10/SPARC M10 Systems Installation Guide ･ July 2015
182
MASTER
Table