Setting A User Account And Password - Fujitsu M10 Installation Manual

7.2

Setting a User Account and Password

Set a user account and password appropriate to the use environment, and assign a
user privilege to the user account.
1.
Execute the adduser command to add a user account.
The following example specifies jsmith for the user account name. If -u is not
specified, the UID is automatically assigned.
XSCF> adduser jsmith
The following example adds a user account with a UID specified.
XSCF> adduser -u 359 jsmith
2.
Execute the password command, and specify a password.
XSCF> password jsmith
Password:
Retype new password:
passwd: password updated successfully
XSCF>
The following example specifies 60 days for the expiration time and 15 days
ahead for the start date for warnings before the password expires.
XSCF> password -M 60 -w 15 jsmith
3.
Execute the setprivileges command to assign a user privilege to the user
account.
The setprivileges command can set the following as user privileges for the entire
system.
Table 7-3 User privilege
User privilege
platadm
Fujitsu M10/SPARC M10 Systems Installation Guide ･ July 2015
198
Overview Description of privilege
Manage the whole - Can perform all hardware operations for
system.
- Can manipulate all XSCF settings except
- Can add/delete hardware in a PPAR.
- Can perform power operations for a
- Can refer to all of the status of the server.
the system.
those requiring the useradm and XSCF
audit privileges.
physical partition.