Configuring The Xscf Network - Fujitsu M10 Installation Manual

7.5

Configuring the XSCF Network

The XSCF network settings consist of XSCF network interface settings such as for the
XSCF-LAN and the protocol for SP to SP communication (SSCP), routing settings,
and DNS-related settings. For details on the purpose and configuration of the XSCF
network, see "3.7.1 Using services through the XSCF network" to "3.7.5 Understanding
the IP addresses that are set with SSCP" in the Fujitsu M10/SPARC M10 Systems
System Operation and Administration Guide.
Table 7-4
XSCF shell commands.
Here, set the essential items in the table. This manual does not describe cases about
setting optional items. See "3.7 Configuring the XSCF Network" in the Fujitsu
M10/SPARC M10 Systems System Operation and Administration Guide.
Table 7-4 Setting items related to the XSCF network
Setting item
Host name/domain name
XSCF network IP address
- XSCF-LAN
- Net mask
- Takeover IP address
- SSCP
Enabling/Disabling the network
Adding/Deleting a network
route
- Destination IP address
- Gateway
- Net mask
Adding/Deleting a DNS
- Name server
- Search path
IP packet filtering rule
Applying the network
lists the setting items related to the XSCF network and the corresponding
Implemented as Reference
initial setting?
Optional "7.5.1 Setting an XSCF host name and
domain
Implemented "7.5.2 Setting an Ethernet (XSCF-LAN) IP
address"
"7.5.3 Setting a takeover IP
"7.5.4 Setting an SSCP IP
Optional "3.7.8 Enabling/Disabling the XSCF
network and setting an XSCF-LAN IP
address and net mask" in the Fujitsu
M10/SPARC M10 Systems System Operation
and Administration Guide.
Implemented "7.5.5 Setting the
Optional "3.7.13 Setting the DNS for the XSCF" in
the Fujitsu M10/SPARC M10 Systems System
Operation and Administration Guide.
Optional "3.7.14 Setting the IP packet filtering rules
for the XSCF network" in the Fujitsu
M10/SPARC M10 Systems System Operation
and Administration Guide.
Implemented "7.5.6 Applying network
name"
address"
address"
routing"
settings"
Chapter 7 Making the Initial System Settings
Related command
sethostname
showhostname
setnetwork
shownetwork
setsscp
showsscp
setnetwork,
shownetwork
setroute
showroute
setnameserver
shownameserver
setpacketfilters
showpacketfilters
applynetwork
rebootxscf
203