| BB | 2 |
| CMUL | 2 |
| Type:B | ( 2) |
| CPU | 4 |
| Freq:3.700 GHz; | ( 4) |
| MEM | 64 |
| Type:07; Size:16 GB; | ( 64) |
| CMUU | 2 |
| Type:B | ( 2) |
| CPU | 4 |
| Freq:3.700 GHz; | ( 4) |
| MEM | 64 |
| Type:07; Size:16 GB; | ( 64) |
| PCICARD | 3 |
| LINKCARD | 0 |
| PCIBOX | 0 |
| IOB | 0 |
| LINKBOARD | 0 |
| PCI | 0 |
| FANBP | 0 |
| PSU | 0 |
| FAN | 0 |
| XBU | 4 |
| Type:A | ( 4) |
| OPNL | 2 |
| PSUBP | 2 |
| Type:B | ( 2) |
| PSU | 4 |
| Type:B | ( 4) |
| FANU | 10 |
| XBBOX | 0 |
| XBU | 0 |
| XSCFU | 0 |
| OPNL | 0 |
| XBBPU | 0 |
| XSCFIFU | 0 |
| PSU | 0 |
| FANU | 0 |
+-----------------------------------+------------+
3.
Execute the showlogs error command.
Confirm that no error is displayed. If an error is displayed, see
the contents of
XSCF> showlogs error
4.
Execute the showstatus command.
When there is no problem, the command displays nothing.
If a failure has occurred in any unit, an asterisk (*) and the unit status are
displayed. See
degradation
Fujitsu M10/SPARC M10 Systems Installation Guide ・ July 2015
192
logs."
"A.2.3 Checking information on a component where a failure or
occurred."
"A.2.2 Checking