Fujitsu M10 Installation Manual page 146

Figure 3-80 Securing the cable support fixing brackets and the rails
Mounting
area (2U)
d. After attaching the cable support fixing brackets, confirm that the rack door
Note - If the door cannot close because the cable support fixing bracket or the cable support
protrudes from the rear of the rack, do not attach the cable support bracket. However, secure
the rail to the rack with two M6 screws.
7.
Secure the rail sides by using the screws (M5) removed in step 4 (A in
3-81).
Figure 3-81 Securing the sides of rails with screws
8.
Mount the PCI expansion unit in the rack.
Fujitsu M10/SPARC M10 Systems Installation Guide ･ July 2015
132
REAR
can close.
FRONT
2U center
1U center
REAR
A (M5 screws)
Figure