Confirming Delivered Components; Confirming The Delivered Components Of The Sparc M10-1 - Fujitsu M10 Installation Manual

Table 3-1 List of necessary tools (continue d)
Name
Wrench or box wrench (upper connecting screw M12:
nominal size 19)
Stepladder
ESD mat and antistatic wrist strap
Lifter
(hydraulic or mechanical jack)
System management terminal
(ASCII terminal, workstation, terminal server, patch
panel connected to terminal server, etc.)
3.2

Confirming Delivered Components

Here, confirm delivered components by referring to the List of Attachments that
comes with the chassis. If any item is missing, incorrect, or damaged, contact the
retailer from which the product was purchased or a sales representative.

Confirming the delivered components of the SPARC M10-1

■
Confirming the delivered components of the SPARC M10-4
■
Confirming the delivered components of the SPARC M10-4S
■
Confirming the delivered components of the PCI expansion unit
■
Confirming the delivered components of an expansion rack
■
3.2.1 Confirming the delivered components of the
SPARC M10-1
This section describes the confirmation of delivered components of the SPARC M10-1.
1.
Confirm the delivered components by referring to the List of Attachments that
comes with the SPARC M10-1.
Table 3-2
change without notice.
Table 3-2 Reference: List of accessories for the SPARC M10-1
Name
SPARC M10-1 chassis
Fujitsu M10/SPARC M10 Systems Getting Started Guide
(*)
Fujitsu M10/SPARC M10 Systems Installation Guide ･ July 2015
68
Use
Used to connect racks
Used for mounting at high locations in racks
Used in the work of mounting optional components
Used in the work of mounting chassis in racks
Used to connect to the XSCF and for the work of
checking and configuring the XSCF firmware
below is a list of accessories for the SPARC M10-1. The accessories may
Quantity
1
1
Remarks