Fujitsu M10 Installation Manual page 24

Number in figure
1
2
3
4
The number shown after BB# or XBBOX# is the ID (BB-ID) identifying the unit. The
IDs of the SPARC M10-4S are set, starting at 00. The IDs of crossbar boxes are set,
starting at 80.
By clicking a reference in " " to display a section, you can see the details of the
respective step.
Table 1-5 Workflow for connections through crossbar boxes
Step (work time (*1)) Work description
Installation work (approx. 59 minutes/approx. 280 minutes (*2))
1 Check the latest information available
in the Fujitsu M10/SPARC M10 Systems
Product Notes.
2 Before installing the system, check the
safety precautions, system specifications,
and necessary conditions for
installation.
3 Prepare the necessary tools/
information for installation.
4 Confirm the delivered components.
5 Before installing the rack, connect the
power cords to a power distribution
unit (PDU) of the rack.
6 Install the rack.
7 If there are two racks, connect them.
8 If there are optional components,
mount them on the chassis.
9 Set the ID required for identifying each
chassis.
10 Connect crossbar cables, XSCF BB
control cables, and the XSCF DUAL
control cable to the chassis.
11 Connect serial cables, LAN cables, and
power cords to crossbar boxes.
Fujitsu M10/SPARC M10 Systems Installation Guide ･ July 2015
10
Description
SPARC M10-4S
Crossbar unit
Crossbar cable (optical)
Crossbar box
Reference
Fujitsu M10/SPARC M10 Systems
Product Notes
"Chapter 2 Planning and Preparing
for System
"3.1 Preparing the Necessary
Tools/Information for
"3.2.3 Confirming the delivered
components of the SPARC
"3.2.5 Confirming the delivered
components of an expansion
"3.3.1 Connecting the power cords
to the power distribution units of an
expansion
See the manual for each rack.
"3.3.2 Securing the
"3.3.3 Connecting
"3.5.2 Mounting optional
components in the SPARC
M10-4/SPARC
"4.1 Setting the ID (BB-ID)
Identifying a
"4.3.2 Connecting crossbar
"4.3.3 Connecting XSCF
"5.4 Connecting Cables to a
Crossbar
Installation"
Installation"
M10-4S"
rack"
rack"
rack"
racks"
M10-4S"
Chassis"
cables"
cables"
Box"
Required
Required
Required
Required
Required
Required
Required
Optional (*3)
Required
(*4)
Required
(*5)
Required