Fujitsu M10 Installation Manual page 372

Table C-1 XSCF setup command examples (continued)
XSCF command example
setpcl -p 0 -a 0=00-0
setpcl -p 0 -s policy=system Sets the configuration policy
showboards -a
addboard -c assign -p 0
00-0
showpparmode -p 0
setpparmode -p 0 -m
cpumode=compatible
Synchronizing the physical partition time with the XSCF time
showdate
setdate -s 102016592012.00
showdateoffset -p 0
resetdateoffset -p 0
Configuring CPU Activation
showcodactivation
addcodactivation -F
file:///media/usb_msd/
XXXXX_XX.TXT
setcod -p 0 -s cpu 4
Fujitsu M10/SPARC M10 Systems Installation Guide ･ July 2015
358
Description
Registers a system board in a physical
partition configuration list
Example: System board 00-0 is
mapped to logical system board 0 of
physical partition 0.
Example: The configuration policy is
set to "All physical partitions" for
physical partition 0.
Displays information on all mounted
PSBs
Assigns a system board (PSB) to a
physical partition
Example: System board 00-0 is added
to physical partition 0.
Checks the CPU Mode of the physical
partition
Sets the CPU Mode of the physical
partition to "compatible"
Displays the XSCF clock date and time Yes
Sets the XSCF clock date and time
Example: 16:59:00 on 2012/10/20 in
local time (JST) is set.
Displays the difference between the
XSCF time and the physical partition
time
Resets the difference between the
XSCF time and the physical partition
time
Displays the CPU Activation key
information
Adds a CPU Activation key
Example: The "XXXXX_XX.TXT" file
on a USB device is specified to add a
CPU Activation key.
Assigns CPU core resources to a
physical partition
Example: Four CPU cores are
assigned to physical partition 0.
Mandatory? Linked section
Yes "7.7 Creating a Physical
(M10-4S) Partition Configuration List
(PCL)"
Optional "7.7 Creating a Physical
Partition Configuration List
(PCL)"
Yes "7.8 Assigning a System Board
(PSB) to a Physical Partition
(PPAR)"
Yes "7.8 Assigning a System Board
(M10-4S) (PSB) to a Physical Partition
(PPAR)"
Optional "7.9 Setting a CPU Operational
Mode for the Physical
Optional "7.9 Setting a CPU Operational
(M10-4S) Mode for the Physical
"7.10 Synchronizing the
Physical Partition (PPAR) Time
and XSCF Time"
Yes "7.10 Synchronizing the
Physical Partition (PPAR) Time
and XSCF Time"
Yes "7.10 Synchronizing the
Physical Partition (PPAR) Time
and XSCF Time"
Yes "7.10 Synchronizing the
Physical Partition (PPAR) Time
and XSCF Time"
Yes "7.11.2 Checking a CPU
Activation key"
Yes "7.11.3 Registering a CPU
Activation key"
Yes "7.12 Assigning CPU Core
Resources"
Partition"
Partition"