Fujitsu M10 Installation Manual page 22

Table 1-4 Workflow for the SPARC M10-4S (continued)
Step (work time (*1)) Work description
15 Log in to the SPARC M10-4S, and
check the firmware version number,
altitude setting, and time setting.
16 Perform an initial diagnosis test on the
physical system board (PSB).
17 Check the status of mounted
components.
Initial system settings (approx. 92 minutes)
18 Set the password policy.
19 Set a user account and password.
20 Configure the telnet or SSH service.
21 Configure the HTTPS service.
22 Configure the XSCF network.
23 When duplicating memory, configure
memory mirroring.
24 Create the PPAR configuration
information (PCL).
25 Assign the system board (PSB) to the
physical partition.
26 Set a CPU operational mode for the
physical partition.
27 Clear the difference between the
system time and physical partition
(PPAR) time.
28 Add a CPU Activation key to the
system.
29 Assign CPU resources to the physical
partition.
30 Confirm the start/stop of the physical
partition and the connection of the
console.
*1 Average work time for the 4BB configuration
*2 Time required for mounting optional components is not included.
*3 If the optional components are ordered together with the chassis, they are shipped mounted to the chassis.
*4 One CD-ROM disk containing a CPU Activation certificate is provided with the system. The system may be shipped with a registered
CPU Activation key.
Fujitsu M10/SPARC M10 Systems Installation Guide ･ July 2015
8
Reference
"6.3 Logging In to the XSCF"
"6.4 Checking the XCP Version"
"6.5 Checking the Altitude
"6.6 Checking the Time Setting"
"6.7 Performing a Diagnosis
"6.8 Checking the Component
Status"
"7.1 Setting the Password
"7.2 Setting a User Account and
Password"
"7.3 Configuring the Telnet/SSH
Service"
"7.4 Configuring the HTTPS
Service"
"7.5 Configuring the XSCF
Network"
"7.6 Configuring Memory
Mirroring"
"7.7 Creating a Physical Partition
Configuration List (PCL)"
"7.8 Assigning a System Board
(PSB) to a Physical Partition
"7.9 Setting a CPU Operational
Mode for the Physical Partition"
"7.10 Synchronizing the Physical
Partition (PPAR) Time and XSCF
Time"
"7.11 Registering a CPU Activation
Key"
"7.12 Assigning CPU Core
Resources"
"7.13 Starting and Stopping a
Physical Partition (PPAR)"
Required
Setting"
Test" Required
Required
Policy" Required
Required
Required
Required
Required
Optional
Required
Required
(PPAR)"
Optional
Required
Required
(*4)
Required
Required