Fujitsu M10 Installation Manual page 101

For fixed installations of the rack
Fixing in place using the quakeresistant options kit
■
Attach the quakeresistant options kit (which is optional so must be ordered
separately) around the rack (front, rear, and sides), and fix it to the slab (building
floor) by using the holes in the kit.
Figure 3-14 Fixed in place by the quakeresistant options kit
Fixing in place using the leveling feet
■
Fix the rack to the slab (building floor) by using holes with a depth of 17 mm (0.7
in.) for screws of size M20 on the bottom of the leveling feet of the rack.
Figure 3-15 Example of being fixed in place by the leveling feet
Number in Description
figure
1 Leveling foot
2 Free-access floor
3 Bolt (M20)
4 Frame
5 Supporting column
Chapter 3 Installing the System 87