Fujitsu M10 Installation Manual page 371

Table C-1 XSCF setup command examples (continued)
XSCF command example
showhostname -a
sethostname bb#00
scf0-hostname
sethostname -d
example.com
setnetwork bb#00-lan#0
-m 255.255.255.0
192.168.1.10
setnetwork lan#0 -m
255.255.255.0 192.168.1.12
showsscp -a
setsscp
showroute -a
setroute -c add -n 0.0.0.0
-g 192.168.1.1 bb#00-lan#0
applynetwork
rebootxscf -a
Setting memory mirror mode
showfru -a
setupfru -m y sb 00-0
Configuring a physical partition
showpcl -p 0
Description
Displays the set host names of the
master chassis and the chassis with
the standby XSCF
Sets a host name
Example: The host name "scf0-
hostname" is set for BB#00.
Sets a DNS domain name
Example: The domain name
"example.com" is set.
Configures an XSCF-LAN network
interface
Example: The IP address 192.168.1.10
and the net mask 255.255.255.0 are set
for XSCF-LAN#0 of BB#00.
Sets a takeover IP address
Example: The takeover IP address
192.168.1.12 and the net mask
255.255.255.0 are set for XSCF-LAN#0.
Displays the SSCP link setting values
Assigns an IP address to an SSCP link
Displays routing information
Sets routing information
Example: The default gateway IP
address 192.168.1.1 is added to
XSCF-LAN#0 of BB#00.
Applies XSCF network information to
the XSCF
Resets the XSCF
Displays the set information for all
devices
Sets the memory mounted on a PSB to
mirror mode
Example: All CPUs under PSB 00-0
are set to memory mirror mode.
Displays physical partition (PPAR)
configuration information (PCL)
Mandatory? Linked section
No "7.5.1 Setting an XSCF host
name and domain
Optional "7.5.1 Setting an XSCF host
name and domain
Optional "7.5.1 Setting an XSCF host
name and domain
Yes "7.5.2 Setting an Ethernet
(XSCF-LAN) IP
Yes "7.5.3 Setting a takeover IP
(M10-4S) address"
No "7.5.4 Setting an SSCP IP
address"
Optional "7.5.4 Setting an SSCP IP
address"
No "7.5.5 Setting the
Yes "7.5.5 Setting the
Yes "7.5.6 Applying network
settings"
Yes "7.5.6 Applying network
settings"
Optional "7.6 Configuring Memory
Mirroring"
Optional "7.6 Configuring Memory
Mirroring"
Yes "7.7 Creating a Physical
(M10-4S) Partition Configuration List
(PCL)"
Appendix C Setup Command Workflow
name"
name"
name"
address"
routing"
routing"
357