Fujitsu M10 Installation Manual page 25

Table 1-5 Workflow for connections through crossbar boxes (continued)
Step (work time (*1)) Work description
Initial diagnosis (approx. 117 minutes/approx. 151 minutes)
12 Connect the system management
terminal to the chassis.
13 Confirm that the chassis identification
IDs (BB-IDs) are set.
14 Turn on the input power.
15 Log in to the SPARC M10-4S, and
check the firmware version number,
altitude setting, and time setting.
16 Perform an initial diagnosis test on the
physical system board (PSB).
17 Check the status of mounted
components.
Initial system settings (approx. 130 minutes/approx. 200
minutes)
18 Set the password policy.
19 Set a user account and password.
20 Configure the telnet or SSH service.
21 Configure the HTTPS service.
22 Configure the XSCF network.
23 When duplicating memory, configure
memory mirroring.
24 Create the PPAR configuration
information (PCL).
25 Assign the system board (PSB) to the
physical partition.
26 Set a CPU operational mode for the
physical partition.
27 Clear the difference between the
system time and physical partition
(PPAR) time.
28 Add a CPU Activation key to the
system.
29 Assign CPU resources to the physical
partition.
Reference
"6.1 Connecting the System
Management Terminal to the
"6.2.1 Checking the BB-ID settings
(for the SPARC M10-4S)"
"6.2.2 Turning on the input power
and starting the XSCF"
"6.3 Logging In to the XSCF"
"6.4 Checking the XCP Version"
"6.5 Checking the Altitude
"6.6 Checking the Time
"6.7 Performing a Diagnosis
"6.8 Checking the Component
Status"
"7.1 Setting the Password
"7.2 Setting a User Account and
Password"
"7.3 Configuring the Telnet/SSH
Service"
"7.4 Configuring the HTTPS
Service"
"7.5 Configuring the XSCF
Network"
"7.6 Configuring Memory
Mirroring"
"7.7 Creating a Physical Partition
Configuration List (PCL)"
"7.8 Assigning a System Board
(PSB) to a Physical Partition
"7.9 Setting a CPU Operational
Mode for the Physical Partition"
"7.10 Synchronizing the Physical
Partition (PPAR) Time and XSCF
Time"
"7.11 Registering a CPU Activation
Key"
"7.12 Assigning CPU Core
Resources"
Chapter 1 Understanding the Installation Flow
Required
Chassis"
Required
Required
Required
Setting"
Setting"
Test" Required
Required
Policy" Required
Required
Required
Required
Required
Optional
Required
Required
(PPAR)"
Optional
Required
Required
(*6)
Required
11