Fujitsu M10 Installation Manual page 120

Figure 3-39 Using the cage nut attachment tool
c. Pull the tool forward to attach the cage nut.
Figure 3-40 Attaching a cage nut
A
For supporting columns with M6 screw holes
Remove the pins at the front and rear of the rail.
a. Remove the screw (A in
b. Remove the pin (B in
c. Remove pins from the left and right rails in the same manner.
d. Store the removed pins and screws (eight pins and eight screws in total) for
Fujitsu M10/SPARC M10 Systems Installation Guide ･ July 2015
106
Direction of
tool hook tip
Push in direction A while simultaneously pulling in direction B as shown in
Figure 3-40.
Figure
future use when the chassis is moved.
Cage nut attachment tool
B
Completed view
Figure 3-41) securing the rail pin.
3-41).