Fig 2-19 Trays 3, 4, And 5 No Paper Actuators; Rrp 2-14Trays 3, 4, And 5 No Paper Actuators (Pl 12.3~Pl 12.4) - Xerox DOCUPRINT N4525 Service Quick Reference Manual

RRP 2-14Trays 3, 4, and 5 No Paper Actuators
(PL 12.3~PL 12.4)
No Paper Sensor

Fig 2-19 Trays 3, 4, and 5 No Paper Actuators

Use this procedure for removing and replacing the No Paper Actuator for Trays 3, 4 and 5.
Removal
1.
Remove the Paper Tray associated with the No Paper Actuator you are going to
remove.
2.
Remove the No Paper Sensor (RRP 2-15) associated with the No Paper
Actuator you are going to remove.
3.
Squeeze together the sides of the Actuator Bracket and remove the Actuator
Bracket from the High Capacity Feeder frame.
4.
Press the Actuator out of the Bracket.
Replacement
1.
Press the legs of the Actuator into the slots on the Bracket.
The Actuator snaps in to place.
2.
Reinstall the Bracket into the opening in the High Capacity Feeder frame by
positioning the Bracket so the Actuator paddle faces the front of the printer.
3. Insert the left side of the Bracket into the opening, then squeeze together the
sides of the Bracket while inserting the right side into the opening.
4.
Release the Bracket and it should snap into place and secure the Bracket to
the frame.
5.
Reinstall the No Paper Sensor (RRP 2-15).
6.
Reinstall the Paper Tray.
2-432 DocuPrint N4525 Network Printer - Service Guide
Actuator