Mmb Cli - Fujitsu PRIMEQUEST 2000 Series Administration Manual

CHAPTER 10 Configuration and Status Checking (Contents, Methods, and Procedures)

10.2 MMB CLI

Sets the SB and IOU that configure a partition.
Sets a Reserved SB.
Power Limiting of each partition is set.
Displays the partition status and various information
related to the partition.
Sets conditions for automatically restarting the partition
(ASR (Automatic Server Restart) Control).
Starts video redirection.
Sets various modes for the partition.
Displays information on the currently registered user
account.
Changes the password of the currently logged-in user.
Displays a list of users connected to the MMB via
Serial, Telnet/SSH, and Web-UI.
Sets the MMB date and time.
Sets the IP address and other values for MMB access.
Sets Speed/Duplex of each port on the MMB board.
Sets the network protocol of the MMB.
Configures automatic update for Web-UI windows
whose status changes.
Makes settings related to SNMP.
Sets an SNMP trap destination.
Sets the Engine ID and makes user settings specific to
SNMP v3.
Creates a secret key and the corresponding CSR
(signature request).
Retrieves the secret key or CSR (signature request)
stored on the MMB.
Imports the signed electronic certificate sent from the
certificate authority to the MMB.
Creates a self-signed certificate.
Creates a private key for the SSH server.
Makes the user settings required for control of the
MMB via RMCP from the remote server.
Operates access control for network protocols.
Sets e-mail notification for when an event occurs.
Executes the batch firmware update process.
Backs up and restores MMB/UEFI configuration
information.
Provides support in the form of a wizard for device
maintenance.
Operates REMCS and makes settings related to
REMCS.
10.2 MMB CLI
You can access the MMB CLI via the MMB serial port or the management LAN. The commands that you can
use from the MMB CLI include those for display and settings.
For details on MMB command lines, see Chapter 2 MMB CLI (Command Line Interface) Operations in the
PRIMEQUEST 2000 Series Tool Reference (C122-E177EN).
For details on functions provided by the MMB CLI, see the reference sections in the PRIMEQUEST 2000
Series Tool Reference (C122-E177EN).
Function
209
Reference sections in the PRIMEQUEST 2000
Series
Tool Reference (C122-E177EN)
1.3.4 [Partition Configuration] window
1.3.5 [Reserved SB Configuration] window
1.3.6 [Power Management Setup] window
1.3.7 [Partition#x] menu
1.3.7 [Partition#x] menu
1.3.7 [Partition#x] menu
1.3.7 [Partition#x] menu
1.4.1 [User List] window
1.4.2 [Change Password] window
1.4.3 [Who] window
1.5.1 [Date/Time] window
1.5.2 [Network Interface] menu
1.5.3 [Management LAN Port Configuration]
window
1.5.4 [Network Protocols] window
1.5.5 [Refresh Rate] window
1.5.6 [SNMP Configuration] menu
1.5.6 [SNMP Configuration] menu
1.5.6 [SNMP Configuration] menu
1.5.7 [SSL] menu
1.5.7 [SSL] menu
1.5.7 [SSL] menu
1.5.7 [SSL] menu
1.5.8 [SSH] menu
1.5.9 [Remote Server Management] window
1.5.10 [Access Control] window
1.5.11 [Alarm E-Mail] window
1.6.1 [Firmware Update] menu
1.6.2 [Backup/Restore Configuration] menu
1.6.3 [Maintenance Wizard] window
1.6.4 REMCS menu
C122-E175-02EN