Generation Management Volume (Sdv) Creation; Figure 5.9 Generation Management Volume (Sdv) Creation - Fujitsu ETERNUS DX60 S3 Configuration Manual

Chapter 5 General Settings
5.7 RAID Configuration Settings
5.7.3

Generation Management Volume (SDV) Creation

Create a generation management volume in the backup RAID group.
Create SDV for seven generations (as a backup area for seven days a week) in the backup RAID group "RG1"
created in "5.7.1 RAID Group Creation" (page

Figure 5.9 Generation Management Volume (SDV) Creation

Backup RAID group (RG1)
2TB
RAID5 (2+1)
The procedure to create a generation management volume (SDV) is as follows:
1
Click the [Volume] tab on the navigation of the ETERNUS Web GUI screen.
The [Volume] screen appears.
2
In [Action], click [Create].
The [Create Volume] screen appears.
3
Set the required items in the [Create Volume] screen and click the [Create] button.
Name: sdv
Type: Snap Data Volume
Capacity of source volume: 1TB (*1)
RAID Group / TPP Selection: Manual
Manual Setting: RG1
Number of Volumes: 7 (*2)
*1: Enter the capacity of the copy source volume during creation of SDV.
*2: If "7" is specified for the number of volumes, sdv0, sdv1, sdv2, sdv3, sdv4, sdv5, and sdv6 volumes
are created.
2TB
2TB
FUJITSU Storage ETERNUS DX60 S3 Disk storage system Configuration Guide (Basic)
Copyright 2014 FUJITSU LIMITED
71).
Generation management volume
sdv0 - sdv6
(Snap Data Volume)
75
P3AM-9002-01ENZ0