Recall Standard Data; Running Test Mode - Konica Minolta 7145 Service Manual

8.8.7 Recall standard data

Reset the adjusted set values of timing adjustment
to the standard values (factory default data).
The following are included in the return to standard
data:
• Recall standard data : Vertical/Horizontal magni-
fication adjustment
• Recall standard data : Restart timing adjustment
• Recall standard data : Paper feed loop amount
adjustment
• Recall standard data : Leading edge original era-
sure adjustment
• Recall standard data : Centering adjustment
• Recall standard data : Original read point adjust-
ment
A. Procedure
1. Enter the 36 mode.
2. "36 mode menu screen"
Press the [2. Timing adj.] key.
3. "Timing adjustment menu screen"
Press the [7. Factory default] key.
4. "Resetting standard data screen"
Press the arrow key until the desired item
appears in the message display area.
5. Press the [YES] key to reset the set values to
the standard values that have been selected
and to return to the "Timing adjustment menu
screen". Press the [NO] or [RETURN] key, then
the set values are not reset and return to the
"Timing adjustment menu screen".
6. To reset another adjustment item, repeat steps
4 to 5.
7. Press the [RETURN] key to return to the "Timing
adjustment menu screen".
8.9

Running Test Mode

Conduct a test while in continuous copying opera-
tion.
Select the [3. Running mode] in the "36 mode menu
screen", then the "Running test mode menu screen"
will appear.
The following items can be selected:
A. Intermittent copy mode
In this mode, after the set number of copy oper-
ations has been completed, the machine goes
into the copy ready status, waits 0.5 sec., then
starts the same operation again.
B. Paperless intermittent copy mode
It makes copies at roughly the same timing as
for a normal copy, without performing paper
detection or jam detection. Also, like running
mode 1, after the set number of copy opera-
tions has been completed, the machine goes
into the copy ready status, waits 0.5 sec., then
starts the same operation again.
C. Paperless mode
It makes copies at roughly the same timing as
for a normal copy, without performing paper
detection or jam dection.
D. Paperless/endless mode
It automatically sets the copy quantity to infinity.
Also, like running mode 3, it makes copies at
roughly the same timing as for a normal copy,
without performing paper detection or jam
detection.
E. Running mode
Running mode consists of paperless/endless
mode plus an operation consisting of an optics
each time scan and an automatic paper feed
tray change.
1-59
36 MODE