Table 12-9: Sctp Parameters - AudioCodes Mediant 1000 User Manual

User's Manual
ini File Field Name
SCTPAssociationsNum
SCTPChecksumMethod
SCTPDNetNum
SCTPHBInterval
SCTPHostName
SCTPISTRMNum
SCTPMaxAssocInitAttempts
SCTPMaxAssocRet
SCTPMaxDataChunkSize
Version 4.6

Table 12-9: SCTP Parameters

Description
Defines the maximum number of
Stream Control Transmission Protocol
(SCTP) associations that can be
opened.
Stream Control Transmission Protocol
(SCTP) uses a checksum mechanism
in order to authenticate packets on
both sides (the receiving side and the
transmitting side).
Two checksum mechanisms exist:
adler32 checksum mechanism,
activated when this parameter is set to
0
crc32 checksum mechanism, which is
the improved mechanism, activated
when this parameter is set to 1.
Defines the maximum number of
association transport addresses that
can be active.
Defines the SCTP heartbeat interval.
When set to any value other than an
empty string, SCTP (Stream Control
Transmission Protocol) uses the value
as the value of the FQDN (Fully
Qualified Domain Name) parameter
attached to the INIT chunk. In this
case, the FQDN parameter replaces
any IP address parameters in the INIT
chunk.
This overcomes NAT problems where
the original IP addresses belonging to
the endpoint supports are converted
into pseudo addresses. When this
parameter is not set (default), the INIT
chunk is sent without any FQDN
parameter.
Range = String[42]
Defines the maximum number of
incoming streams.
Defines the maximum number of SCTP
association initialization attempts.
Defines the maximum number of SCTP
association retransmission attempts.
Defines the maximum length of SCTP
255
12. Appendix - Individual ini File Parameters
Host/Manual
Default Value
NULL
5000
Valid
Range
3 1 to 8
0 0 or 1
3 1 to 3
30 1 to 3600
See
Descr.
10 1 to 200
5 to
10000
10 5 to 20
500 50 to
August 2005