AudioCodes Mediant 1000 User Manual page 241

User's Manual
ini File Field Name
MGCPDTMFDetectionPoint
MGCPRetransmissionTimeout Controls protocols retransmission
MGCPRetransmitionTimeout
ProvisionedCallAgents
ProvisionedCallAgentsPorts
RandomizeTransactionID
RedundantCallAgentDomain
Name
RTCPInterval
SingleSIDPacketWith
SCEG729
Version 4.6
Table 12-5: Common Control Parameters
Description
Defines if the detection of DTMF
events is notified at the start or end of
DTMF.
0 = at start of DTMF
1 = at the end of DTMF
timeout. Sets the initial time (in msec)
for the first retransmission. The
retransmission intervals thereafter
increase exponentially.
Sets the initial time for the first
retransmission. The Retransmission
intervals thereafter increase
exponentially.
Use this parameter to define a list of
up to 10 (MGCP) or 5 (MEGACO)
legal IP addresses separated by ',' or
';' for the ServiceChange command.
The gateway starts connecting with
the first and in case of failure,
attempts the others.
Range: Legal IP Address
Use this parameter to define a list of
up to 10 (MGCP) or 5 (MEGACO) Call
Agent UDP ports separated by , or ;
for each Call Agent defined by the
parameter used to specify the Allowed
Call Agent Address.
Defines if the transactions produced
by the board start with a fixed or
random number.
1 = Randomize On
Refer also to the parameters defining
Transaction Id Range and Transaction
ID Base.
Defines the redundant MGCP Call
Agent domain name.
Range = String[63]
Default = ' ' (empty string)
Defines the time interval between the
adjacent RTCP reports, in msec.
When using a G.729 coder connection
and SCE (Silence Suppression
Enable) is On, a single SID packet is
241
12. Appendix - Individual ini File Parameters
Host/Manual
Default Value
200
200
NULL
2944
See Descr.
5000
Valid
Range
1 0 or 1
0 to 10000
0 to 65535
See Descr.
0 to 65535
1 0 or 1
See Descr.
0 to 65535
0 0 or 1
August 2005