AudioCodes Mediant 1000 User Manual page 209

User's Manual
ini File Field Name
DNSSecServerIP
EnableParametersMonitoring
EnableSTUN
EnableSyslog
IniFileTemplateUrl
IniFileURL
InitialShellCommand
NATBindingDefaultTimeout
NTPServerIP
NTPServerUTCOffset
NTPUpdateInterval
Version 4.6
Table 12-1: System Parameters
Description
Defines the DNS secondary server's
IP address.
Range = Legal IP address
enables monitoring of on-the-fly
parameter changes via Syslog
messages.
1 = activate; 0 = deactivate (default)
Enables the STUN module, used for
NAT traversal of UDP packets.
Enables the Syslog protocol log.
1 = Activate; 0 = Deactivate
Links to an ini file to be downloaded
from a remote server, in addition to
IniFileUrl.
Range = http://server_name/file,
https://server_name/file
Link to an ini file to be downloaded
from a remote server.
Range = tftp://server_ip/file,
http://server_name/file,
https://server_name/file
A Command Shell command to be
executed during initialization. Several
commands can be entered (separated
by a semicolon).
Defines the NAT binding lifetime, in
seconds. STUN refreshes the binding
information after this time expires.
Range = 0 to 2592000
This parameter is used to define the
NTP server's IP address.
Range = Legal IP address
This parameter is used to define the
NTP time to offset, in seconds.
Range = -43200 to + 43200 seconds
This parameter defines the NTP
update interval, in seconds. Do not set
it exceeding 1 month (2592000
seconds).
Range = 0 to 2592000 seconds
Default = 86400 seconds
209
12. Appendix - Individual ini File Parameters
Host/Manual
Default Value
0.0.0.0
NULL
NULL
NULL
30
0.0.0.0
See Descr.
Valid
Range
See Descr.
0 0 or 1
0 0 or 1
0 0 or 1
See Descr.
See Descr.
-
See Descr.
See Descr.
0 See Descr.
See Descr.
August 2005