21.2
Replacing the Main Corporate Logo
The main corporate logo can be replaced either with a different logo image file (refer to
"Replacing the Main Corporate Logo with an Image File" below) or with a text string' (refer
to Replacing the Main Corporate Logo with a Te'xt String.)
Note:
21.2.1 Replacing the Main Corporate Logo with an Image File
Note:
To replace AudioCodes' default logo with your own corporate logo
via the Web interface, take these 8 steps:
Access the Embedded Web Server (refer to ''Accessing the Embedded Web Server''
1.
on page 137).
In the browser's URL field, enter the IP address of the location of the AudioCodes'
2.
Web Interface Application, followed by /AdminPage.
If you have not accessed this page for a while, you are prompted for your user name
3.
and Password. Enter them and press OK.
On the Main-menu bar to the left, click the Logo Image Download option. The Image
4.
Download screen appears.
User's Manual
When the main corporate logo is replaced, the AudioCodes logo in the main
menu bar on the left (refer to ''About the Web Interface Screen'' on page
139) and the AudioCodes logo in the Software Upgrade Wizard (refer to
''Software Upgrade Wizard'' on page 178) disappear.
Use a gif, jpg or jpeg file for the logo image. It is important that the image file
has a fixed height of 59 pixels (the width can be configured). The total size
limit for the image files is 128 k bytes if both files are loaded. Each file type
(Logo file or BKG file) should not exceed 64 k bytes).
Figure 21-2: Logo Image Download Screen
336
Digital Mediant 1000
Document # LTRT-66001