Web & Telnet Access List; Figure 8-15: Web & Telnet Access List Screen - AudioCodes Mediant 1000 User Manual

User's Manual
8.6.1.3 Web & Telnet Access List
To configure the Web & Telnet Access List, take these 4 steps:
From the main menu list on the left, click on the Advanced Configuration link. The
1.
Advanced Configuration screen appears.
From the sub-menu bar on the top, move the cursor on the Network Settings link. A
2.
drop-down menu appears. Click on the Web & Telnet Access List option. The Web &
Telnet access List screen appears.
To add a new authorized IP address, in the New Authorized IP Address field at the
3.
bottom portion of the screen, enter the desired IP address and click the Add New
Address button.
To delete an authorized IP address, in the upper portion of the screen, click a
4.
checkmark into the checkbox of the desired IP address row (checkmarks in more than
one row is permissible) and click the Delete Selected Addresses button.
Note 1:
Note 2:
Version 4.6
Figure 8-15: Web & Telnet Access List Screen
When all authorized IP addresses are deleted this security feature becomes
disabled.
When adding the first authorized IP address, you should add your own
terminal's IP address in order to be able to connect to the web server after
adding the first IP address that is not your current terminal's IP address.
153
8. Mediant 1000 Management
August 2005