Process Cas Tables - AudioCodes Mediant 1000 User Manual

User's Manual
Note:
Close the File Data dialog by clicking on the
9.
cancel changes.). You are returned to the Voice Prompts window.
The default Output file name is voiceprompts.dat.You can modify it. Or,
10.
Use the
and select it. The selected file name and its path appear in the Output field.
Click the Make File(s) button to generate the Voice Prompts file. The Progress bar at
11.
the bottom of the window is activated. The dat file is generated and placed in the
same directory as shown in the Output File field. A message box informing you that
the operation was successful indicates that the process is completed.
The generated file can be used only for downloading using the ini file facility or using
12.
acOpenRemoteBoard() in full configuration operation mode. When using the
acAddVoicePrompt(), use the single raw voice prompt files.

17.2.3 Process CAS Tables

To produce a CAS table, take these 10 steps:
Construct the CAS protocol xxx.txt and xxx.h files according to the instructions in the
1.
sections on "Caller ID Support" and "CAS Protocol Table" in the "VoPLib User's
Manual", Document #: LTRT-844xx.
Copy the files generated in the previous step (or at least the xxx.h file) to the same
2.
directory in which DConvert240.exe is located and make sure that the two following
files, CASSetup.h and CPP.exe, are also located in this same directory.
Version 4.6
For wav files, a coder is automatically selected from the wav file header.
Browse button to select a different Output file. Navigate to the desired file
Exit button. (Press the Esc key to
295
17. Appendix - Utilities
August 2005