AudioCodes Mediant 1000 User Manual page 77

User's Manual
# DNS is required for specifying domain names in URLs
DnsPriServerIP = 10.1.1.11
# Load extra configuration ini file using HTTP
INIFILEURL = 'http://webserver.corp.com/AudioCodes/inifile.ini'
# Load call progress tones using HTTPS
# Note: HTTPS is not available on MP-104, MP-108, MP-124 platforms
CPTFILEURL = 'https://10.31.2.17/usa_tones.dat'
# Load voice prompts, using user "root" and password "wheel"
VPFILEURL = 'https://root:wheel@webserver.corp.com/vp.dat'
# Update every day at 03:00 AM
AutoUpdatePredefinedTime = '03:00'
Notes on Configuration URLs:
Additional URLs may be specified, as described in the ''System Parameters' table' on
page 207.
Updates to non-ini files are performed only once. To update a previously-loaded
binary file, you must update the ini file containing the URL for the file.
To provide differential configuration for each of the devices in a network, add the string
"<MAC>" to the URL. This mnemonic is replaced with the hardware (MAC) address of
the Mediant 1000.
To update the firmware image using the Automatic Update facility, use the
CMPFILEURL parameter to point to the image file. As a precaution (in order to protect
the Mediant 1000 from an accidental update), you must also set
AUTOUPDATECMPFILE to 1.
The following example illustrates how to utilize Automatic Updates for deploying devices
with minimum manual configuration.
To utilize Automatic Updates for deploying the Mediant 1000 with
minimum manual configuration, take these 4 steps:
Set up a Web server (in this example it is http://www.corp.com/) where all the
1.
configuration files are to be stored.
On each device, pre-configure the following setting: (DHCP/DNS are assumed)
2.
INIFILEURL = 'http://www.corp.com/master_configuration.ini'
Create a file named master_configuration.ini, with the following text:
3.
Version 4.6
6. Mediant 1000 Initialization & Configuration Files
77 August 2005