AudioCodes Mediant 1000 User Manual page 210

ini File Field Name
PrtFileUrl
RedundantBoardIPAddress
ResetNow
SaveConfiguration
SendKeepAliveTrap
STUNServerPrimaryIP
STUNServerSecondaryIP
SyslogServerIP
SystemOperationStateChange
Profile
User's Manual
Table 12-1: System Parameters
Description
Links to a prerecorded tones dat file,
to be downloaded from a remote
server.
Range = http://server_name/file,
https://server_name/file
Defines the IP address of the
redundant board, to which state DB
packets are sent. Range = Any IP
address
This parameter causes an immediate
restart of the device. The parameter
can be used for configuration files
loaded via IniFileUrl.
Determines if the device configuration
(and the loadable file) is saved in
flash.
Choose either:
1 = Save configuration file (the Call
Progress Tones, PRT and/or
coefficient file) in non-volatile memory
0 = Don't save
When Enabled, this parameter
invokes the keep-alive trap and sends
it out every 9/10 of the time defined in
the parameter defining NAT Binding
Default Timeout.
Defines the primary STUN Server IP
address.
Range = Legal IP address
Defines the secondary STUN server
IP address.
Range = Legal IP address
Defines the IP address in dotted
format notation.
e.g., 192.10.1.255
Range = Legal IP address
This parameter defines the System
Operation state Change Profile.
0 = Disable
1 = Nortel AMS ATM
Refer to the enumerator
acSystemOperationStateChangeProfil
210
Digital Mediant 1000
Host/Manual Valid
Default Value Range
NULL See Descr.
NULL See Descr.
0 0 or 1
1 0 or 1
0 -
0.0.0.0 See Descr.
0.0.0.0 See Descr.
0.0.0.0 See Descr.
0 0 or 1
Document # LTRT-66401