Channel Parameters; Table 6-12: Channel Parameters - AudioCodes MP-124 User Manual

6.5.12 Channel Parameters

ini File Field Name
Web Parameter Name
DJBufMinDelay
DJBufOptFactor
AnalogSignalTransportType
FaxTransportMode
FaxRelayEnhancedRedundanc
yDepth
FaxRelayRedundancyDepth
FaxRelayMaxRate
FaxRelayECMEnable
FaxModemBypassCoderType
CNGDetectorMode
FaxModemBypassM
FaxBypassPayloadType
CallerIDTransportType
ModemBypassPayloadType
FaxModemRelayVolume
DetFaxOnAnswerTone
EchoCancellerAggressiveNLP Enables or disables the Aggressive NLP at the first 0.5 second of
SIP User's Manual
http://ArtTel.ru
The Channel Parameters define the DTMF, fax and modem transfer modes.

Table 6-12: Channel Parameters

For a description of this parameter, refer to 'Configuring the RTP /
RTCP Settings' on page 183.
For a description of this parameter, refer to 'Configuring the RTP /
RTCP Settings' on page 183.
For a description of this parameter, refer to 'Configuring the RTP /
RTCP Settings' on page 183.
For a description of this parameter, refer to 'Configuring the Fax /
Modem / CID Settings' on page 179.
For a description of this parameter, refer to 'Configuring the Fax /
Modem / CID Settings' on page 179.
For a description of this parameter, refer to 'Configuring the Fax /
Modem / CID Settings' on page 179.
For a description of this parameter, refer to 'Configuring the Fax /
Modem / CID Settings' on page 179.
For a description of this parameter, refer to 'Configuring the Fax /
Modem / CID Settings' on page 179.
For a description of this parameter, refer to 'Configuring the Fax /
Modem / CID Settings' on page 179.
For a description of this parameter, refer to 'Configuring the Fax /
Modem / CID Settings' on page 179.
For a description of this parameter, refer to 'Configuring the Fax /
Modem / CID Settings' on page 179.
For a description of this parameter, refer to 'Configuring the RTP /
RTCP Settings' on page 183.
For a description of this parameter, refer to 'Configuring the Fax /
Modem / CID Settings' on page 179.
Modem Bypass dynamic payload type (range 0-127).
The default value is 103.
-18 to -3, corresponding to -18 dBm to -3 dBm in 1 dB steps. The
default is -12 dBm fax gain control.
For a description of this parameter, refer to 'General Parameters'
on page 70.
the call. When enabled, the echo is removed only in the first half a
second of the incoming IP signal.
Valid Range and Description
[0] = Disable (default)
[1] = Enable
316
MediaPack Series
Document #: LTRT-65409