Function; Parameters; Table 15-2: Cas Parameters - AudioCodes Mediant 1000 User Manual

User's Manual
•
EV_REJECT_RESERVE2 - When using acCASAcceptCall with
CALLED_RESERVE2 as its reason parameter.
7. Miscellaneous:
•
EV_DIALED_NUM_DETECTED - (Incoming call) dialed destination number is
collected after START_COLLECT was previously activated and the condition for
incoming_call_detected event is satisfied (see ST_INIT for conditions details).
•
EV_DIAL_ENDED - Dialing initiated by table SEND_DEST_NUM is completed
(last digit has been sent).
•
EV_ANI_NUM_DETECTED - This action is used to inform the script file of a
successful reception of the ANI digits string, or when timeout of digit waiting
occurs. This is reported at the incoming call detected event, when the ANI flag is
YES.
•
EV_FIRST_DIGIT - Reception of first digit out of the incoming digit string. Used in
the FXO protocols, where informing the script of receiving of the first digit,
enables the script to use the SEND_PROG_TON function to stop the dial tone.
15.6

Function

The function column holds the name of the function to be activated when the action
specified in the action/events field occurs. Select the functions from the list of eight
functions defined in CasSetup.h. (e.g., START_COLLECT). When NONE is specified in
this column, no function is executed.
15.7

Parameters

Parameter #1
Parameter #2
Parameter #3
List of available user-functions and their parameters:
SET_TIMER (timer number, timeout) - Set timers that are managed per B-channel,
and their expiration triggers the state machine table. Each protocol table/state
machine can use up to 8 timers per B-channel/call, (timeout in msec).
SEND_CAS (AB value, CD value) - ABCD bits are sent as line signaling for the
specific channel when the call is setup.
SEND_EVENT (event type, cause) - The specific event type is sent to the host/user
and retrieved by applying acGetEvent().
SEND_DEST_NUM - Enbloc dialing: Enbloc dialing: refers to the digits string located
in the acPSTNPlaceCall function. Three types are available: (1) DestPhoneNum (2)
InterExchangePrefixNum (3) SourcePhoneNum.
DEL_TIMER (timer number) - Delete specific or all timers (0 for all) for the B-channel.
START_COLLECT - Initiates the collection of address information i.e. the dialed
(destination) number for incoming calls where appropriate according to the protocol. At
Version 4.6

Table 15-2: CAS Parameters

These columns are used as the function's parameters. The list of global
parameters can be found in CasSetup.h.
If a parameter is not essential, the parameter is marked None.
273
15. Appendix - CAS Protocol Table
August 2005