Configuring Table Parameters - AudioCodes Mediant 800 User Manual

CHAPTER 6 Web-Based Management
ii.
● If a device reset is required:
i.
ii.
When you click Apply, your changes are saved only to the device's volatile memory
and thus, revert to their previous settings if the device later undergoes a hardware reset,
a software reset (without saving to flash) or powers down. Therefore, make sure that
you save your configuration to the device's flash memory.

Configuring Table Parameters

A typical configuration table is shown below and subsequently described:
Table 6-2: General Description of Configuration Tables
Item# Button
1
Click Yes to confirm; the changes are save to flash memory.
On the toolbar, click Reset; the Maintenance Actions page opens.
Click Reset; the device saves the changes to flash memory and then resets.
- Page title (i.e., name of table). The page title also displays the number of
configured rows as well as the number of invalid rows. For more
information on invalid rows, see
Mediant 800 Gateway & E-SBC | User's Manual
Description
Invalid Value
- 25 -
Indications.