Change Password - AudioCodes Mediant 1000 User Manual

User's Manual
To send a Call Progress Tone, CAS, or Voice Prompt file to the
board, take these 6 steps:
From the main menu list on the left, click on the Advanced Configuration link. The
1.
Advanced Configuration screen appears.
From the sub-menu bar on the top, click the Regional Settings link. The Regional
2.
Settings screen appears. (Refer to the figure below.)
Click the Browse button to locate the predefined Call Progress Tone, CAS, or Voice
3.
Prompt file as appropriate. (A new software file package may be issued from
AudioCodes or your local supplier.)
Click the Send File button. The file is sent to the board, overwriting the previous one.
4.
The screen is refreshed and a message informs you about the waiting period. When
the loading is complete, a verification message is displayed at the bottom of the
screen: File XXX was successfully loaded into the device.
For CPT file downloading only - (The rest of files do not require a device reset.) From
5.
the main menu list on the left, click Reset. The Reset screen appears.
Select the Burn option and click the Restart button. Wait for the device to reset. After
6.
self-testing, the Ready and LAN LEDs on the device's front panel are lit green. Any
malfunction causes the Ready LED to change to red.
To set the date and time, take these 2 steps:
Enter the date and/or time using the YYYY, MM, and DD field for Year, Month and
1.
Day and HH, MM, and SS fields for Hour, Minutes and Seconds.
Click the Set Date and Time button. The date and time is set on the device,
2.
accordingly.
Note:
8.6.5.1

Change Password

To change the Password, take these 4 steps:
From the main menu list on the left, click on the Advanced Configuration link. The
1.
Advanced Configuration screen appears.
From the sub-menu bar on the top, click the Change Password link. The Change
2.
Password screen appears.
Note:
Version 4.6
When the NTP feature is enabled (the NTP server is defined in the Network
Settings screen), the date and time are in Read Only mode as they are set
by the NTP server.
A user with Administrator privileges may change both Administrator and
Monitoring level passwords. A user with Monitoring privileges may change
only the Monitoring level password.
169
8. Mediant 1000 Management
August 2005