Message Log; Figure 8-37: Voice Settings Screen; Figure 8-38: Ibs Detector Settings Screen; Figure 8-39: Jitter Buffer Settings Screen - AudioCodes Mediant 1000 User Manual

User's Manual
8.7.2

Message Log

The Message Log is similar to a Syslog. It provides debug messages useful in pursuing
troubleshooting issues.
The Message Log serves the Web Server and is similar to a Syslog server. It displays
debug messages. It is not recommend to use the Message Log screen for logging errors
and warnings because errors can appear over a prolonged period of time, e.g., a device
can display an error after running for a week. Similarly, It is not recommend to keep a
Message Log session open for a prolonged period (refer to the Note below). For logging of
errors and warnings, refer to ''Syslog'' on page 187.
To activate the Message Log, take these 4 steps:
From the main menu list on the left, click on the Status and Diagnostics link. The
1.
Status and Diagnostics screen appears and Log is activated.
Version 4.6

Figure 8-37: Voice Settings Screen

Figure 8-38: IBS Detector Settings Screen

Figure 8-39: Jitter Buffer Settings Screen

175
8. Mediant 1000 Management
August 2005