Security Settings; Figure 8-16: Security Settings Screen - AudioCodes Mediant 1000 User Manual

8.6.1.4

Security Settings

To configure the Security Settings, take these 14 steps:
From the main menu list on the left, click on the Advanced Configuration link. The
1.
Advanced Configuration screen appears.
From the sub-menu bar on the top, move the cursor on the Network Settings link. A
2.
drop-down menu appears. Click the Security Settings option. The Security Settings
screen appears.
Use the ''Web Interface Parameters'' on page
3.
configuring/modifying the Application Settings parameter fields in the Application
Settings screen.
After configuring/modifying the parameter fields, click the SUBMIT button. The
4.
changes are entered into the system and the screen is refreshed.
Each screen represents a single row in the Security Settings table. User can navigate
5.
between rows by selecting the desired row index in the Policy Index drop-down list at
the top of the screen.
Table rows may be in 2 states – existent or non-existent – as stated in option showing
6.
in the Policy Index drop-down list.
For an existent row you may delete it by clicking the Delete button, or you may re-
7.
configure it by configuring the desired parameters and clicking the Apply button.
For a non existent row you may create it by configuring the parameters and clicking
8.
the Create button.
Table rows may be in 2 states – existent or non-existent – as stated in the options
9.
showing in the Policy Index drop-down list.
For an existent row you may delete it by clicking the Delete button, or you may re-
10.
configure it by configuring the desired parameters and clicking the Apply button.
For a non existent row you may create it by configuring the parameters and clicking
11.
the Create button.
User's Manual

Figure 8-16: Security Settings Screen

154
Digital Mediant 1000
246 and tab as a reference when
Document # LTRT-66401