Table 12-8: Snmp Parameters - AudioCodes Mediant 1000 User Manual

ini File Field Name
DisableSNMP
PM_EnableThresholdAlarms
SetCommunityString
SNMPManagerIP
SNMPManagerIsUsed
SNMPManagerTableIP
SNMPManagerTrapPort
SNMPManagerTrapSending
Enable
SNMPPort
User's Manual

Table 12-8: SNMP Parameters

Description
Enables or disables SNMP.
0 = Enable; 1 = Disable
Sends SNMP traps and Syslog
messages when performance of the
device is degraded (according to the
configured thresholds).
User-determined community string
with access limited to ini file entered
values only. This parameter is the
singular version of the
readWriteCommunityStrings, and
corresponds to
readWriteCommunityStrings_0.
Range = String[19]
Defines the IP address of the default
SNMP manager, in dotted notation
format:
xxx.xxx.xxx.xxx.
SNMP traps are sent to this
manager.
Range = string[15]
Enables a row in the SNMP
Managers table. 0 = row is disabled;
1 = row is enabled.
Used to define the SNMP manager
server IP address. This is the tabular
version of the parameter defining
SNMP Manager IP.
Range = String[15]
Sets the trap ports to be used by the
different managers.
This parameter is the tabular version
of the parameter defining SNMP Trap
Port.
Enables the SNMP Manager's IP
address for traps to be sent to it.
When set to 1, traps are sent to this
manager's IP address;. when set to
0, traps are not sent to it.
This parameter specifies the port
number for SNMP requests and
responses. Generally, it isn't
specified and the default is used.
252
Digital Mediant 1000
Host/Manual Valid
Default Value Range
0 or 1
0 0 or 1
NULL See Descr.
NULL See Descr.
0 0 or 1
0 See Descr.
162 100 to
3999
1 0 or 1
161 100 to
3999
Document # LTRT-66401