AudioCodes Mediant 1000 User Manual page 226

ini File Field Name
IUAInterfaceID
LineBuildOut.LOSS
LineBuildOut.Overwrite
LineBuildOut.XPM0
LineBuildOut.XPM1
LineBuildOut.XPM2
LineCode
NFASGroupNumber
User's Manual
Table 12-3: PSTN Parameters
Description
several behavior options that influence
how the ISDN Stack OUTGOING calls
behave. Refer to the VoPLib
documentation (ISDN Flexible
Behavior).
Defines the IUA trunk interface ID value
- unsigned integer - in RFC 3057 -
SigTran. Default = 0xFFFFFFFF.
Selects the line build out loss to be
used for this trunk.
0 = 0 dB
1 = -7.5 dB
2 = -15 dB
3 = -22.5 dB
Overwrites the Framer's XPM registers
values (these registers control the line
pulse shape).
0 = No overwrite
1 = Overwrite
Controls the Framer's XPM0 register
value (line pulse shape control).
Applicable only when
TrunkConfig.LineBuildOut.Overwrite=1.
Should be used only by expert users.
Controls the Framer's XPM1 register
value (line pulse shape control).
Applicable only when
TrunkConfig.LineBuildOut.Overwrite=1.
Should be used only by expert Users.
Controls the Framer's XPM2 register
value (line pulse shape control).
Applicable only when
TrunkConfig.LineBuildOut.Overwrite=1.
Should be used only by expert Users.
Selects line code. B8ZS or AMI for T1
spans and HDB3 or AMI for E1 spans.
0 = (default) HDB3 for E1, B8ZS for T1
1 = Use AMI line code (for T1 or E1
trunks)
2 = Use HDB3 line code (for E1 trunks
only)
Relevant only to T1 ISDN NFAS trunks,
indicates the group number of the
226
Digital Mediant 1000
Host/Manual Valid
Default Value Range
Descr.
See Descr. -
0 0 to 3
0 0 or 1
0 0 to 255
0 0 to 255
0 0 to 255
0 0 to 2
0 0 to 4
Document # LTRT-66401