Table 12-6: Megaco Specific Parameters - AudioCodes Mediant 1000 User Manual

ini File Field Name
ATM_BIT_FIELD_SIZE
ATM_Num
DigitMapName
DIGITMAPPING
EP_BIT_Field_Size
EP_Num
LogicalATMTermPattern
LogicalRTPTermPattern
MEGACO_MID
MEGACOASN1Profile
User's Manual

Table 12-6: MEGACO Specific Parameters

Description
(For binary MEGACO) Defines the bit
field size for each ATM termination
name level.
Defines the starting number for each
ATM termination level name.
Range: Any positive number.
Name of the provisioned digit map.
Range = String[10]
The digit map patterns separated by a
vertical bar (|), as defined in the
MEGACO RFC.
Range = String[151]
(For binary MEGACO) Defines the bit
field size for each name level (level 0
is the left one, i.e. the Trunk number).
The total binary name is 32 bits long.
Defines the starting number for each
name level (level 0 is the left one
when looking at the parameter
defining Phys Term Name Pattern.
Thus, to start trunk numbering from 1,
set EP_NUM_0 to 1.
Range: Any positive number.
Defines the name pattern of an ATM
termination.
Range: String [30]
Defines the name pattern of an RTP
termination. For example: 'gw/rtp/*'.
The '*' sign stands for the actual
number of the RTP termination.
Range: String [30]
Defines the media gateway's MID
towards the MGCP/MEGACO Call
Agent. If empty or illegal, the MID
holds the IP address of the board.
Range: String[64]
Used to profile the binary ASN.1
encoding.
Range: Integer >0
Refer to the product's User's Manual
for possible values.
244
Digital Mediant 1000
Host/Manual Valid
Default Value Range
0 0 to 30
0 See
Descr.
NULL See
Descr.
NULL See
Descr.
0 0 to 30
0 See
Descr.
NULL See
Descr.
NULL See
Descr.
NULL See
Descr.
1 See
Descr.
Document # LTRT-66401