User's Manual
8.4
Getting Acquainted with the Web Interface
8.4.1
About the Web Interface Screen
The figure below is an example of the General layout of the Web Interface screen.
The Web Interface screen contains the following parts:
Title bar - contains the corporate logo, background images and product name
Main menu bar - always appears to the left on every screen for quick access to the
other main modules
Sub-menu bar - always appears at the top on every screen and contains links to the
sub-menus of the main module selected in the main menu bar to the left
Main action pane - The main area of the screen in which information is viewed and
configured
The Web interface is divided into the following 7 modules in the main menu bar to the left:
Quick Setup - Use this module to configure the device's basic settings. (For the full
list of configurable parameters go directly to the Protocol Management and Advanced
Configuration menus.)
Protocol Management - Use the menus in this module to configure the device's
control protocol parameters.
Advanced Configuration - Use the menus in this module to set the device's
advanced configuration parameters (for advanced users only).
Status & Diagnostics - Use the menus in this module to view and monitor the
device's channels, Syslog messages and hardware / software product information.
Software Update - Use the menus in this module when you want to load new
Version 4.6
Figure 8-2: Web Interface Screen - Example
139
8. Mediant 1000 Management
August 2005