AudioCodes Mediant 1000 User Manual page 61

User's Manual
[MEGACO]
; List of Call agents, separated by ','. The default is the loading
computer.
PROVISIONEDCALLAGENTS = 10.2.1.254
; List of ports for the above Call Agents, separated by ','. The default
is 2944.
PROVISIONEDCALLAGENTSPORTS = 2944
; IP of the LOG server
LOGSERVERIP = 10.2.1.254
; The next 3 field are the parts of the termination name. For example, if
you wish the
; name to look like: 'gw3/tr0/ep1', you shall define: ;GATEWAYNAME =
'gw3/',
; TRUNKNAME = 'tr', and ENDPOINTNAME = 'ep' . The RTP in built from the
GATEWAYNAME,
; the string 'RTP' and a number. In this example it shall be: gw3/ RTP0.;
GATEWAYNAME = 'c4'
TRUNKNAME = 's'
ENDPOINTNAME = 'c'; This parameter activates the MEGACO!!!! If omitted,
MGCP will be active
MGCONTROLPROTOCOLTYPE = 2
; The following disables the keep-alive mechanism if set to 0, else it is
enabled
KEEPALIVEENABLED = 1
;
; This parameter defines the profile used. 1 - is for version 2, 2 - for
version 1
MGCPCOMPATIBILITYPROFILE = 2
Note:
The lists of individual ini file parameters are provided in the Appendix, ''Individual 'ini' File
Parameters'' on page 207.
Version 4.6
Before loading an ini file to the Mediant 1000, make sure that the extension
of the ini file saved on your PC is correct: Verify that the checkbox Hide
extension for known file types (My Computer>Tools>Folder Options>View)
is unchecked. Then, verify that the ini file name extension is xxx.ini and NOT
erroneously xxx.ini.ini or xxx~.ini.
6. Mediant 1000 Initialization & Configuration Files
61 August 2005