AudioCodes Mediant 1000 User Manual page 127

User's Manual
To add the first Trusted Manager, take these 3 steps:
The following procedure assumes that there is at least one configured read-write
community. There are currently no Trusted Managers. The taglist for columns for all
srCommunityTable rows are currently empty.
Add a row to the snmpTargetAddrTable with these values: Name=mgr0,
1.
TagList=MGR, Params=v2cparams.
Add a row to the tgtAddressMaskTable table with these values: Name=mgr0,
2.
tgtAddressMask=255.255.255.255:0. The agent does not allow creation of a row in
this table unless a corresponding row exists in the snmpTargetAddrTable.
Set the value of the TransportLabel field on each non-TrapGroup row in the
3.
srCommunityTable to MGR.
To add a subsequent Trusted Manager, take these 2 steps:
The following procedure assumes that there is at least one configured read-write
community. There are currently one or more Trusted Managers. The taglist for columns for
all rows in the srCommunityTable are currently set to MGR. This procedure must be done
from one of the existing Trusted Managers.
Version 4.6 127
8. Mediant 1000 Management
August 2005