AudioCodes Mediant 1000 User Manual page 233

User's Manual
ini File Field Name
ForceExceptionDump
GOLDServiceClassDiffServ
HeartbeatDestIP
HeartbeatDestPort
HeartbeatIntervalmsec
HeartbeatSecondaryDestIP
ICMPUnreachableReport
Interval
INIFileVersion
LocalControlDefaultGW
Version 4.6
Table 12-4: Infrastructure Parameters
Description
in the BootP request to provide
device-related, initial startup
parameters such as board type,
current IP address, software version,
Geographical Address, etc. This is not
available in DHCP.
Forces an exception dump that is sent
every time the board restarts.
0 = Disable; 1 = Enable
Sets the DiffServ for the Gold service
class content.
Sets the destination UDP port to
which the heartbeat packets are sent.
Range = IP address in dotted notation
xxx.xxx.xxx.xxx
Sets the destination UDP port to
which the heartbeat packets are sent.
Sets the time delay in msec between
consecutive heartbeat packets.
Range = 0x0 to 0xFFFFFFFF
Default = 0xFFFFFFFF
Sets the secondary destination IP
address to which the heartbeat
packets are sent.
Range = IP address in dotted notation
xxx.xxx.xxx.xxx
Determines:
(a) The time the board ignores
incoming ICMP unreachable packets
from the channel activation time
(b) The time it takes from the last
ICMP unreachable packet until the
board reports ICMP Reachable.
Range = unsigned long
Contains the ini file version number
that is reported in the
acEV_BOARD_STARTED event.
Range = Long integer value.
Defines the default gateway of the
Control when operating in a multiple
IP mode.
233
12. Appendix - Individual ini File Parameters
Host/Manual
Default Value
0.0.0.0
See Descr.
0.0.0.0
5000
0.0.0.0
Valid
Range
0 0 or 1
26 0 to 56
See Descr.
0 0 to 64000
See Descr.
See Descr.
See Descr.
0 See Descr.
See Descr.
August 2005