Network Port Usage - AudioCodes Mediant 1000 User Manual

User's Manual
To configure RADIUS support on the Mediant 1000 using the ini
file, take these 3 steps:
Open the ini file in any text editor.
1.
Add the following lines to the ini file:
2.
•
ENABLERADIUS = 1
•
WEBRADIUSLOGIN = 1
•
RADIUSAuthServerIP = IP address of RADIUS server
•
RADIUSAuthPort = port number of RADIUS server, usually 1812
•
SHAREDSECRET = 'your shared secret'
•
HTTPSONLY = 1
Save the configuration and restart the device. When you connect to the Telnet
3.
interface, use the name and password configured in the RADIUS database. The old
system password is still active, and may be used if the RADIUS server is down.
16.3

Network Port Usage

The following table lists the default TCP/UDP network port numbers used by the Mediant
1000. Where relevant, the table lists the ini file parameters that control the port usage and
provide source IP address filtering capabilities.
Version 4.6 285
16. Appendix - Security
August 2005