Regional Settings - AudioCodes Mediant 1000 User Manual

8.6.5

Regional Settings

From the Regional Settings screen users can send a Call Progress Tones dat file, a CAS
dat file and/or a Voice Prompts dat file to the device from their PC.
To access the Regional Settings screen, take these 2 steps:
From the main menu list on the left, click on the Advanced Configuration link. The
1.
Advanced Configuration screen appears.
From the sub-menu bar on the top, click the Regional Settings link. The Regional
2.
Settings screen appears.
Figure 8-28: Regional Settings Screen - Sending CPT, CAS and/or Voice Prompt File to the
The files are available on the CD accompanying your device. They can also be received as
an e-mail attachment from AudioCodes' Technical Support. A Call Progress Tones txt file
can be modified and converted into the binary dat file (refer to 'Converting a CPT ini File to
a Binary dat File' in the Appendix, 'Utilities'). When modifying the Call Progress Tones File,
only the dat file can be sent from your PC to the device. (Refer to ''Modifying the Call
Progress Tones File'' on page
The Call Progress Tones dat file is a region-specific, telephone exchange-dependent
file. It provides call status/call progress to Customers, operators, and connected
equipment. Default Tones: USA.
E1/T1 CAS signaling files, such as E_M_WinkTable.dat are needed for CAS protocols
only.
The dat Voice Prompts file is played by the device during the phone conversation on
Call Agent request. Download if you have an application requiring Voice Prompts. The
Voice Prompt buffer size in the board is 10 Mbyte.
The dat Voice Prompts file is played by the device during the phone conversation on
Call Agent request. Download if you have an application requiring Voice Prompts. The
Voice Prompt buffer size in the board is 1 Mbyte.
User's Manual
Device
74 and the Appendix, ''Utilities'' on page 289.)
168
Digital Mediant 1000
Document # LTRT-66401