Table 12-2: Media Processing Parameters - AudioCodes Mediant 1000 User Manual

User's Manual
ini File Field Name
AMDDetectionDirection
ATMG711DefaultLawSelect
BasicRTPPacketInterval
BellModemTransportType
BrokenConnectionEvent
ActivationMode
BrokenConnectionEvent
Timeout
CallerIDTransportType
Version 4.6

Table 12-2: Media Processing Parameters

Description
Determines the AMD (Answer
Machine Detector) detection
direction.
0 = Detection from the TDM side
1 = Detection from the Network side
Determines the ATM G.711 Default
Law Select.
0 = A-law; 1 = µ-law
Selects the RTP packet rate for
sample-based coders (such as
G.711, G.726, G.727). Also
applicable for G.729, G.729E &
G.728.
0 = Default (set internally)
1 = 5 msec
2 = 10 msec
3 = 20 msec
Use this parameter to set the Bell
modem transport method.
0 = Transparent
2 = Bypass (enum ByPassEnable)
3 = Transparent with Events (enum
EventsOnly)
Determines when to enable detection
of broken connections. See the
VoPLib manual for more information.
Default = 0 = Activate when the voice
channel is opened for receiving
1 = Activate when the first RTP
packet is received
Determines for how long the RTP
connection should be broken before
the Broken Connection event is
issued. In units of 100 msec.
Range = 3 to 21474836 in units of
100 msec (300 to 0x80000000 msec)
Default = 3 (= 300 msec)
Defines the Caller ID transport type.
Disable Caller ID (0): Caller ID
detectors are not activated. The
213
12. Appendix - Individual ini File Parameters
Host/Manual
Default Value
See Descr.
Valid
Range
0 0 or 1
0 0 or 1
0 0 to 3
0 0, 2, 3
0 0 or 1
See Descr.
3 0 to 3
August 2005