User's Manual
Access the Routing Table screen (Advanced Configuration->Network Settings-
2.
>Routing Table):
Access the VLAN Settings screen (Advanced Configuration->Network Settings->VLAN
3.
Settings):
19.5
OAM Parameters
If the your network architecture requires the OAM network settings be different than the
parameter values acquired in the BootP process, you must set the local OAM configuration
line in the ini file to the required parameters. The example below shows the form of these
parameter settings using the following sample parameter values:
OAM network:
•
IP/Subnet/GW = 10.34.174.50 / 255.255.0.0 / 0.0.0.0
•
VLAN ID = 7
Version 4.6
19. Appendix - Getting Started with VLANs and IP Separation
Figure 19-2: Routing Table Screen
Figure 19-3: VLAN Settings screen
321
August 2005