AudioCodes Mediant 1000 User Manual page 214

ini File Field Name
CallerIDType
CallProgressDetectorEnable
CASTransportType
CNGDetectorMode
ConnectionEstablishment
NotificationMode
DisableNAT
User's Manual
Table 12-2: Media Processing Parameters
Description
Caller ID signal flows in the regular
RTP audio stream.
Relay Caller ID (1): Presently the
same as Mute.
Mute Caller ID (2): CallerID signals
detected and reported but muted
from the RTP voice stream.
Defines the supported Caller ID type.
0 = Bellcore
1 = ETSI
2 = NTT
4 = British
16 = ETSI_ETS
17 = Denmark
18 = Indian
19 = Brazilian
Enables or disables detection of Call
Progress Tones.
0 = Disable; 1 = Enable
Controls the ABCD signaling
transport type over IP.
0 = No Relay over the network
1 = Enable CAS relay according to
RFC 2833
Determines the CNG Detector mode.
0 = Disable
1 = Relay
2 = Event Only
Determines the notification mode for
the RTP connection establishment
event
acEV_CONNECTION_ESTABLISHE
D.
0 = Notify only after a broken
connection event
1 = Also notify when the first RTP
packet is received
Enables or disables the NAT feature.
0 = Don't disable NAT; 1 = Disable
NAT
214
Digital Mediant 1000
Host/Manual Valid
Default Value Range
0 0 to 19
1 0 or 1
0 0 or 1
0 0 to 2
0 0 or 1
1 0 or 1
Document # LTRT-66401